How to Customize the Foam Output of Your LTX-12 Touch-Free Dispenser

Understanding Foam Output Settings

When it comes to customizing the foam output of your LTX-12 Touch-Free Dispenser, there are a few important settings to understand. These settings not only determine the amount of foam produced, but also the consistency and thickness of the foam. By adjusting these settings, you can ensure that you are getting the perfect amount of foam for your needs.

The LTX-12 Touch-Free Dispenser offers three distinct foam output settings, each with its own benefits and advantages. Let's take a closer look at each setting and how it affects the foam produced:

• Low Foam Output: This setting is ideal for situations where less foam is desired. It produces a lower volume of foam, making it suitable for areas where excessive foam may be wasteful or unnecessary. It is also great for individuals who prefer a more subtle foam experience.
• Medium Foam Output: This setting strikes a balance between the low and high settings. It produces a moderate amount of foam, which is suitable for most everyday handwashing needs. It provides a good amount of coverage and ensures effective cleansing while still being economical.
• High Foam Output: This setting is perfect for situations where a rich, luxurious foam is desired. It produces a high volume of foam, creating a thick and lathering experience. This setting is great for individuals who enjoy a more indulgent handwashing experience, as well as for high-traffic areas where thorough handwashing is essential.

By understanding and utilizing the different foam output settings on your LTX-12 Touch-Free Dispenser, you can customize your handwashing experience to suit your preferences and needs. Whether you prefer a subtle foam or a rich lather, the foam output settings allow you to achieve the desired result. So go ahead and experiment with the settings to find the perfect foam output for you!

• Customize the amount of foam produced
• Select the desired level of foam thickness
• Optimize foam output for different scenarios or preferences

Adjusting the Foam Output

The Gojo Clear & Mild Foam Handwash is designed for use with the LTX-12 Touch-Free Dispenser to provide a touch-free and hygienic hand washing experience. The foam output of the dispenser can be adjusted to control the amount of foam dispensed, allowing you to customize your hand washing experience to your preferences.

To adjust the foam output setting on the LTX-12 Touch-Free Dispenser, follow these step-by-step instructions:

• Locate the foam output adjustment knob on the top of the dispenser.
• Turn the foam output adjustment knob clockwise to increase the foam output or counterclockwise to decrease the foam output.
• Test the foam output by placing your hand under the dispenser and activating the sensor.
• If the foam output is too low, continue turning the adjustment knob clockwise until the desired amount of foam is dispensed.
• If the foam output is too high, turn the adjustment knob counterclockwise to decrease the foam output.
• Continue adjusting the foam output until you achieve the desired amount of foam.

By following these simple steps, you can easily customize the foam output of your LTX-12 Touch-Free Dispenser to achieve the desired amount of foam for a comfortable and convenient hand washing experience.

Replacing the Foam Hand Soap Refill

When it comes to maintaining the cleanliness of your hands and keeping them germ-free, the Gojo Clear & Mild Foam Handwash is an excellent choice. This EcoLogo Certified hand soap refill comes in a pack of 2, specifically designed for the LTX-12 Touch-Free Dispenser. If you're unsure how to replace the refill, don't worry! We've got you covered with this step-by-step guide.

• Step 1: Locate the LTX-12 Touch-Free Dispenser in your preferred location, ensuring it's easily accessible for both you and others.
• Step 2: Place your hand under the dispenser's sensor to activate the foam hand soap. This will help you determine if it's time to replace the refill.
• Step 3: If the dispenser releases little to no foam, it's a clear sign that the refill needs to be replaced.
• Step 4: To begin the replacement process, open the dispenser by pushing the latch located at the top.
• Step 5: Remove the empty hand soap refill by pulling it straight out from the dispenser.
• Step 6: Take one of the new Gojo Clear & Mild Foam Handwash refills and remove the plastic cap to expose the nozzle.
• Step 7: Insert the new refill into the dispenser, making sure it fits securely.
• Step 8: Close the dispenser by pushing the latch back into place until it clicks.
• Step 9: Test the refill by placing your hand under the sensor once again. You should now see a steady stream of foam being dispensed.

With the Gojo Clear & Mild Foam Handwash refill replaced, your LTX-12 Touch-Free Dispenser will continue to provide you and your guests with a hygienic handwashing experience. Remember, it's important to regularly check the refill and replace it when necessary to ensure the dispenser is always ready to use. Enjoy the convenience and peace of mind that comes with the Gojo Clear & Mild Foam Handwash refill!

• EcoLogo Certified hand soap refill
• Pack of 2
• Specially designed for LTX-12 Touch-Free Dispenser
• Easy replacement process
• Provides a steady stream of foam for effective handwashing
• Ensures a hygienic environment

Proper Foam Handwashing Technique

When it comes to effective handwashing, using the correct technique is key. By following these steps, you can ensure a thorough cleanse while using the Gojo Clear & Mild Foam Handwash with the LTX-12 Touch-Free Dispenser:

• Wet your hands with clean, running water.
• Apply a palmful of the Gojo Clear & Mild Foam Handwash to your hands.
• Rub your hands together to create a lather, making sure to include the backs of your hands, between your fingers, and under your nails.
• Continue scrubbing your hands for at least 20 seconds. You can sing the "Happy Birthday" song twice in your head to keep track of time.
• Rinse your hands thoroughly under clean, running water, ensuring you remove all traces of soap.
• Pat your hands dry with a clean towel or use an air dryer.

The Gojo Clear & Mild Foam Handwash is specifically formulated to gently cleanse your hands while maintaining their natural moisture balance. With its mild, fragrance-free formula and the LTX-12 Touch-Free Dispenser, you can hygienically dispense the foam handwash without the need for any physical contact.

• The LTX-12 Touch-Free Dispenser is designed to provide a controlled amount of the foam handwash with each use, reducing waste and ensuring an optimal handwashing experience.

Maintenance and Cleaning

Proper cleaning and maintenance of the LTX-12 Touch-Free Dispenser is essential to ensure its longevity and optimal performance. By following these tips and instructions, you can keep your dispenser in top shape and provide a hygienic handwashing experience for all users.

1. Regular Cleaning:

• Before performing any maintenance, make sure to turn off the dispenser and remove the batteries.
• Wipe the exterior of the dispenser with a damp cloth or sponge and a mild, non-abrasive soap. Avoid using harsh chemicals or abrasive materials that may damage the dispenser.
• Clean the dispenser nozzle and sensor area using a soft cloth or sponge dampened with warm water and mild soap. Make sure to remove any residue or build-up that may interfere with the dispenser's operation.
• Dry all parts thoroughly before reassembling the dispenser.

2. Deep Cleaning:

• For a more thorough cleaning, you can remove the pump and reservoir from the dispenser. Refer to the manufacturer's instructions for the specific removal process.
• Soak the pump and reservoir in warm water mixed with a mild soap solution for about 15 minutes.
• Gently scrub the pump and reservoir with a soft brush to remove any remaining residue.
• Rinse the pump and reservoir thoroughly with clean water to ensure the removal of all soap residue.
• Allow the pump and reservoir to air dry completely before reinstalling them in the dispenser.

3. Battery Replacement:

• If the dispenser stops dispensing foam or the indicator light flashes rapidly, it may be time to replace the batteries.
• Remove the battery cap located on the back of the dispenser.
• Replace the old batteries with new alkaline D-cell batteries.
• Make sure the batteries are properly aligned with the positive and negative terminals indicated inside the battery compartment.
• Close the battery cover and test the dispenser to ensure it is functioning correctly.

Regular cleaning, deep cleaning, and battery replacement are essential maintenance tasks for the LTX-12 Touch-Free Dispenser. By following these instructions, you can keep your dispenser clean and functioning optimally, providing convenient and hygienic handwashing for all users.

Understanding EcoLogo Certification

When it comes to promoting environmental sustainability, the EcoLogo certification is an important aspect to consider. This certification ensures that products meet rigorous standards of environmental performance. One such product that has obtained this certification is the Gojo Clear & Mild Foam Handwash.

So, what exactly does EcoLogo certification mean for the Gojo Clear & Mild Foam Handwash? Here are some key points to understand:

• EcoLogo certification guarantees that the product has undergone extensive testing to evaluate its environmental impact throughout its life cycle.
• To obtain this certification, the Gojo Clear & Mild Foam Handwash had to meet strict criteria, including factors such as biodegradability, toxicity, and packaging sustainability.
• By choosing EcoLogo certified products, like the Gojo Clear & Mild Foam Handwash, you can contribute to reducing your environmental footprint, as these products are manufactured with environmentally friendly processes and ingredients.
• The EcoLogo certification ensures that the product meets recognized environmental standards and is regularly reviewed to maintain its certification status.
• By using EcoLogo certified products, such as the Gojo Clear & Mild Foam Handwash, you can trust that you are making a sustainable choice without compromising on the effectiveness of the handwash.

Troubleshooting Common Issues

The LTX-12 Touch-Free Dispenser and the Gojo Clear & Mild Foam Handwash are reliable products that provide convenient and hygienic handwashing solutions. However, like any electronic device, they may encounter some common issues. Here are the most frequently encountered issues and troubleshooting steps to help you resolve them:

LTX-12 Touch-Free Dispenser:

• The dispenser does not dispense foam:

If the dispenser does not dispense foam when activated, there are several possible causes and troubleshooting steps to follow:

• Check the battery: Ensure the dispenser has adequate battery power. If the battery is low, replace it with a fresh one.
• Check the soap supply: Make sure the soap refill is properly installed in the dispenser and has not run out.
• Check the sensor: Ensure that the sensor lens is clean and free from any dirt or debris. Gently wipe the sensor with a soft cloth.
• Check for obstructions: Ensure that there are no obstructions interfering with the foam output. Clear away any debris or objects that may be blocking the dispenser.
• The dispenser continuously dispenses foam:

If the dispenser continues to dispense foam even when not activated, try the following troubleshooting steps:

• Check for sensor interference: Make sure there are no objects or surfaces near the dispenser that may be triggering the sensor unintentionally. Move the dispenser to a different location if necessary.
• Check the sensor lens: Clean the sensor lens to remove any dirt or residue that may be affecting its sensitivity.
• Reset the dispenser: Reset the dispenser by removing the batteries for a few minutes, then reinsert them. This will reset the dispenser's internal settings.

Gojo Clear & Mild Foam Handwash:

• The foam handwash is not dispensing:

If the foam handwash is not dispensing properly, try the following troubleshooting steps:

• Check the soap refill: Ensure that the refill is inserted correctly into the dispenser and is not empty. Replace the refill if necessary.
• Prime the pump: Sometimes, air bubbles may accumulate in the pump, causing the foam handwash not to dispense. To prime the pump, press the dispenser's plunger several times until foam is dispensed.
• Clean the nozzle: The nozzle can get clogged with dried soap or debris over time. Clean the nozzle by rinsing it with warm water to remove any blockages.
• The foam handwash is not foaming properly:

If the foam handwash is not producing enough foam, try the following troubleshooting steps:

• Check the dilution ratio: Ensure that the foam handwash concentrate is properly diluted as per the manufacturer's instructions. Adjust the dilution ratio if necessary for optimal foaming.
• Check the water pressure: Low water pressure can affect the foam production. Ensure that the water pressure is adequate for the optimal functioning of the foam handwash.
• Verify the dispenser settings: Check the dispenser settings to ensure that the correct foam volume is selected. Adjust the settings if needed.

• Remember, always refer to the product manuals and instructions for detailed troubleshooting steps specific to your LTX-12 Touch-Free Dispenser and Gojo Clear & Mild Foam Handwash. If the issues persist, contact the product manufacturer for further assistance or potential warranty claims.

Using the Dispenser with Batteries

If you want to use the LTX-12 Touch-Free Dispenser cordlessly, you can easily do so by installing batteries. Here's a step-by-step guide on how to install and replace batteries in the dispenser:

To install batteries:

• Locate the battery compartment on the back of the dispenser.
• Open the battery compartment by sliding the cover in the direction indicated.
• Insert four AA alkaline batteries into the battery compartment, ensuring the polarities match the markings inside.
• Close the battery compartment by sliding the cover back into place.

To replace batteries:

• Locate the battery compartment on the back of the dispenser.
• Open the battery compartment by sliding the cover in the direction indicated.
• Remove the old batteries and dispose of them properly.
• Insert four new AA alkaline batteries into the battery compartment, ensuring the polarities match the markings inside.
• Close the battery compartment by sliding the cover back into place.
• If you experience any issues with battery installation or replacement, refer to the user manual for further instructions or contact customer support for assistance.

By following these steps, you can easily customize the foam output of your LTX-12 Touch-Free Dispenser by using batteries for cordless operation.

• Ensure you use AA alkaline batteries for optimal performance.
• Regularly check the battery life and replace them as needed to prevent any disruption in dispenser function.
• Always dispose of used batteries according to local regulations and guidelines.
• If you encounter any issues or malfunctions with the dispenser, check the batteries first to ensure they are properly installed and not depleted.

Storage and Shelf Life

Proper storage is essential to maintain the quality and effectiveness of the Gojo Clear & Mild Foam Handwash refill and the LTX-12 Touch-Free Dispenser. Here are some guidelines to help you store these products correctly and ensure their extended shelf life:

Gojo Clear & Mild Foam Handwash Refill:

• Store the refill bottles in a cool and dry location, away from direct sunlight and extreme temperatures.
• Avoid storing the refill bottles near chemicals or cleaning agents as they may react and compromise the product's quality.
• Make sure the refill bottles are tightly sealed to prevent contamination and evaporation.
• Keep the refill bottles in an upright position to prevent leakage and maintain the consistency of the foam handwash.
• Check the expiration date on the refill bottles and discard any expired products to ensure optimal performance.

LTX-12 Touch-Free Dispenser:

• Place the dispenser in a well-ventilated area, away from direct sunlight and sources of heat.
• Ensure the dispenser is securely mounted to the wall or other surfaces to prevent accidental damage or theft.
• Regularly clean the dispenser to remove any residue or buildup that may affect the foam output.
• Inspect the dispenser's batteries periodically and replace them as needed to ensure continuous operation.
• Follow the manufacturer's instructions for proper maintenance and troubleshooting, if needed.

By adhering to these storage guidelines, you can maximize the shelf life of your Gojo Clear & Mild Foam Handwash refill and LTX-12 Touch-Free Dispenser, ensuring that they remain in optimal condition for use.

• Remember to periodically check the products for any signs of deterioration or damage.
• If there are any concerns about the quality or performance of the products, it's always recommended to contact the manufacturer for assistance.

Promoting Hand Hygiene Awareness

Hand hygiene is a crucial part of maintaining good health and preventing the spread of germs. To raise awareness about hand hygiene and encourage proper handwashing practices, the Gojo Clear & Mild Foam Handwash and the LTX-12 Touch-Free Dispenser offer great solutions. These products provide an effective and convenient way to promote hand hygiene within various settings.

Here are some suggestions and ideas on how to raise awareness and encourage proper handwashing practices using these products:

• Educational Posters: Display colorful posters in high-traffic areas, such as restrooms, kitchens, and break rooms, that highlight the importance of hand hygiene and proper handwashing techniques. These posters can provide step-by-step instructions and reminders to use the Gojo Clear & Mild Foam Handwash with the LTX-12 Touch-Free Dispenser.
• Training Sessions: Conduct training sessions for employees, students, or other individuals within different settings. These sessions can include demonstrations on the proper handwashing technique and emphasize the benefits of using products like the Gojo Clear & Mild Foam Handwash and the LTX-12 Touch-Free Dispenser.
• Contests and Challenges: Organize hand hygiene contests or challenges where participants can win prizes for demonstrating good handwashing practices. This can create a fun and engaging way to encourage everyone to use the Gojo Clear & Mild Foam Handwash and the LTX-12 Touch-Free Dispenser.

The Gojo Clear & Mild Foam Handwash is specifically formulated to provide a gentle and effective handwashing experience. Its fragrance-free and dye-free formula is suitable for even the most sensitive skin. The LTX-12 Touch-Free Dispenser is a reliable and hygienic solution that dispenses controlled amounts of foam soap without any contact, reducing the spread of germs.

• Social Media Campaigns: Utilize social media platforms to share information and tips about hand hygiene. Create engaging posts, videos, or infographics that highlight the benefits of handwashing and using products like the Gojo Clear & Mild Foam Handwash and the LTX-12 Touch-Free Dispenser. Encourage followers to share their own hand hygiene experiences and tag your organization.
• Hand Hygiene Stations: Set up dedicated hand hygiene stations in key areas, equipped with the LTX-12 Touch-Free Dispenser and the Gojo Clear & Mild Foam Handwash. These stations can include catchy signage, easy-to-follow instructions, and reminders to promote proper handwashing practices.
• Partnerships with Healthcare Providers: Collaborate with local healthcare providers to host workshops or seminars on hand hygiene. These partnerships can help spread awareness and provide valuable information on the importance of handwashing and using products like the Gojo Clear & Mild Foam Handwash and the LTX-12 Touch-Free Dispenser.

By implementing these strategies and utilizing the Gojo Clear & Mild Foam Handwash and the LTX-12 Touch-Free Dispenser, you can effectively promote hand hygiene awareness and encourage proper handwashing practices in various settings. Remember, proper hand hygiene is crucial for maintaining good health and preventing the spread of germs.