How to Extend the Life of Your Gojo Clear & Mild Foam Handwash Dispenser

Proper Handwashing Technique

Proper handwashing is crucial to maintaining good hygiene and preventing the spread of germs. Using the Gojo Clear & Mild Foam Handwash can help ensure effective handwashing. Follow the step-by-step instructions below for the best results:

Step 1: Wet Your Hands

• Start by wetting your hands with clean, running water.
• Avoid using hot water, as it can dry out your skin.

Step 2: Apply Soap

• Dispense the Gojo Clear & Mild Foam Handwash onto your hands.
• You only need a small amount, about the size of a dime, to effectively clean your hands.

Step 3: Lather

• Rub your hands together, ensuring you lather all surfaces.
• Make sure to lather the backs of your hands, between your fingers, and under your nails.
• Continue rubbing your hands together for a minimum of 20 seconds.
• Remember to sing the "Happy Birthday" song twice to ensure you wash your hands for the recommended duration.

Step 4: Rinse

• Thoroughly rinse your hands under clean, running water.
• Ensure all soap is removed from your hands.

Step 5: Dry

• Pat your hands dry with a clean towel or air dry them.
• Make sure your hands are completely dry before touching any surfaces.

Follow these steps every time you wash your hands to maintain proper hand hygiene and extend the life of your Gojo Clear & Mild Foam Handwash dispenser. Proper handwashing is especially important before and after preparing food, after using the bathroom, and when your hands are visibly dirty. It's an essential practice in preventing the spread of germs and keeping yourself and others safe.

• Regularly clean the surface of the Gojo Clear & Mild Foam Handwash dispenser to prevent the buildup of dirt and grime.
• Ensure the dispenser is properly refilled with the Gojo Clear & Mild Foam Handwash to maintain its effectiveness.

Refilling the Dispenser

To ensure the longevity and optimal performance of your Gojo Clear & Mild Foam Handwash dispenser, it is important to correctly refill it with the appropriate refill. Here are the steps to follow:

• Start by opening the dispenser. Locate the dispenser cover, typically situated near the top or the side of the unit, depending on the model. Lift or slide the cover to reveal the refill compartment.
• Once the refill compartment is accessible, you can proceed to remove the empty refill. Look for the release latch or button that holds the refill in place. Press or slide it to release the refill from the dispenser. Carefully take out the empty refill and set it aside.
• Now it's time to install a new refill. Take the replacement refill, ensuring it is the Gojo Clear & Mild Foam Handwash eco-logo certified 1200 mL foam hand soap refill specifically designed for the LTX-12 Touch-Free Dispenser. These refills are available in packs of two for your convenience.
• Position the new refill correctly in the dispenser. Align the refill with the designated slot or compartment and firmly push it until you hear or feel a click, indicating it is securely attached.
• Finally, close the dispenser by either lowering the cover or sliding it back into position. Make sure it is securely closed to prevent any leakage or contamination.

Remember, using the correct refill ensures optimal performance and hygiene, resulting in an effective hand washing experience. Refilling your Gojo Clear & Mild Foam Handwash dispenser is a simple and straightforward process that ensures the ongoing availability of quality hand soap for your personal and professional needs. Follow these instructions to keep your dispenser functioning smoothly.

• Always keep a spare refill on hand to avoid running out of soap when the current refill is empty.
• If the dispenser is battery-operated, remember to check the battery level regularly and replace them as needed to ensure uninterrupted operation.

Troubleshooting Dispenser Issues

If you're experiencing issues with your Gojo Clear & Mild Foam Handwash Dispenser, don't worry! We've got you covered with helpful troubleshooting steps to get your dispenser back up and running smoothly.

Here are some common dispenser issues and step-by-step instructions on how to resolve them:

Clogs in the Dispenser

• Remove the soap refill from the dispenser.
• Inspect the nozzle and look for any visible clogs or obstructions.
• If clogged, use a small brush or toothpick to gently clean the nozzle and remove any debris.
• Rinse the nozzle with warm water to ensure it is clean.
• Reinsert the soap refill and test the dispenser by activating it a few times.

Dispenser Not Dispensing Soap

• Check the battery level of the dispenser by looking at the battery indicator on the front.
• If the battery is low or empty, replace it with fresh batteries.
• Remove the soap refill from the dispenser.
• Inspect the pump mechanism inside the dispenser for any blockages or malfunctions.
• If necessary, clean the pump mechanism by rinsing it with warm water and removing any debris.
• Reinsert the soap refill and test the dispenser by activating it a few times.

Battery Replacement

• Remove the soap refill from the dispenser.
• Locate the battery compartment on the dispenser.
• Open the battery compartment by sliding the cover in the designated direction.
• Remove the old batteries and dispose of them properly.
• Insert fresh batteries into the compartment, ensuring they are correctly aligned as indicated.
• Close the battery compartment cover.
• Reinsert the soap refill and test the dispenser by activating it.

• Remember to always follow the manufacturer's instructions and guidelines for your specific dispenser model.
• If these troubleshooting steps don't resolve the issue, contact Gojo Customer Support for further assistance.

Optimizing Soap Consumption

Using the Gojo Clear & Mild Foam Handwash efficiently is essential to minimize soap waste. By following these tips and techniques, you can extend the life of your Gojo Clear & Mild Foam Handwash Dispenser and make the most out of each use.

• Dispense the right amount: When using the Gojo Clear & Mild Foam Handwash, it is important to avoid dispensing excessive amounts of soap. To optimize soap consumption, dispense no more than a pea-sized amount of foam handwash onto your palm.
• Lather effectively: Properly lathering the soap helps in distributing it evenly on your hands and ensures thorough cleansing. Rub your hands together vigorously, ensuring that you cover all areas including the back of your hands, between your fingers, and under your nails. Continue doing this for at least 20 seconds before rinsing.
• Use water efficiently: Be mindful of your water usage when washing your hands with the Gojo Clear & Mild Foam Handwash. Wet your hands initially to create a good lather, but avoid keeping the water running unnecessarily while you scrub your hands. This will help conserve water and reduce soap waste.
• Best practices: Apart from using the correct amount of soap and lathering effectively, following these best practices will also contribute to optimizing soap consumption:
  • Cover any cuts or wounds on your hands with a waterproof bandage before washing.
  • Remove any jewelry from your hands before washing to ensure thorough cleaning.
  • Wash your hands regularly, especially before and after preparing food, after using the restroom, and after coming into contact with public surfaces.
  • Train your family or team members on proper handwashing techniques to ensure everyone uses an appropriate amount of soap.

Cleaning and Maintenance

Proper cleaning and maintenance of your Gojo Clear & Mild Foam Handwash dispenser is essential to ensure optimal performance and hygiene. Regularly cleaning the exterior, unclogging the pump, and maintaining the battery life (if applicable) will help extend the life of your dispenser and keep it in excellent working condition.

Cleaning the Exterior

• Start by turning off the dispenser to prevent accidental activation during the cleaning process.
• Use a mild, non-abrasive soap and a damp cloth to gently wipe down the exterior of the dispenser. Be sure to clean all surfaces, including the top and sides.
• Rinse the cloth and wipe away any soap residue from the dispenser.
• Allow the exterior of the dispenser to air dry before turning it back on.

Unclogging the Pump

• If the foam handwash dispenser's pump becomes clogged, it may not dispense soap properly. Follow these steps to unclog the pump:
• Turn off the dispenser to prevent accidental activation.
• Remove the soap refill from the dispenser.
• Fill a bowl with warm water and soak the pump in it for a few minutes to loosen any dried soap residues.
• While the pump is soaking, wipe the inside of the dispenser with a clean, damp cloth to remove any excess soap.
• Rinse the pump under running water, ensuring all traces of soap residues are removed.
• Reinstall the pump back into the dispenser and replace the soap refill.
• Tur

Maintaining Battery Life (if applicable)

• If your Gojo Clear & Mild Foam Handwash dispenser is battery-operated, proper maintenance will help prolong battery life:
• Turn off the dispenser before performing any maintenance on the battery.
• Check the battery compartment for any signs of corrosion or leakage. If corrosion is present, gently clean it with a soft cloth and battery cleaner.
• Ensure the batteries are properly inserted, following the +/- markings inside the compartment.
• If the dispenser has a power switch, turn it off when not in use to conserve battery power.
• Replace the batteries as needed, following the manufacturer's recommendations.

Maintaining your Gojo Clear & Mild Foam Handwash dispenser through regular cleaning and proper care will ensure its longevity and reliable performance. By following these cleaning and maintenance instructions, you can keep your dispenser in excellent condition, providing hygienic handwashing for years to come.

Promoting Hand Hygiene

Hand hygiene plays a crucial role in preventing the spread of germs and illnesses. Regularly washing our hands can help eliminate harmful bacteria and viruses, reducing the risk of infections and diseases. An effective way to promote hand hygiene is through the use of the Gojo Clear & Mild Foam Handwash and its accompanying dispenser, the Gojo Clear & Mild Foam Handwash Dispenser.

The Gojo Clear & Mild Foam Handwash is an EcoLogo Certified product that is specifically designed to provide a gentle and effective handwashing experience. It is formulated with a mild, fragrance-free formula that is suitable for all skin types, ensuring that even individuals with sensitive skin can comfortably use it. This foam handwash is both convenient and hygienic, as it can easily be dispensed from the Gojo Clear & Mild Foam Handwash Dispenser without the need for any contact.

• The Gojo Clear & Mild Foam Handwash Dispenser helps extend the life of your foam handwash, ensuring that you get the most out of each refill. By properly using and maintaining the dispenser, you can ensure its longevity and save money in the long run.
• The dispenser is designed to provide controlled portions of the foam handwash, minimizing waste and promoting efficient handwashing practices.
• Regular handwashing with the Gojo Clear & Mild Foam Handwash can help reduce the transmission of illnesses, such as the common cold and flu.
• The mild, fragrance-free formula of the foam handwash is gentle on the skin, making it suitable for frequent use without causing dryness or irritation.

By promoting hand hygiene with the Gojo Clear & Mild Foam Handwash Dispenser, you are helping to create a healthier and safer environment for yourself and those around you. It is essential to raise awareness about the importance of regular handwashing, and the use of reliable products like the Gojo Clear & Mild Foam Handwash can greatly contribute to maintaining good hand hygiene practices.

Installing the Dispenser

If you've recently purchased the Gojo Clear & Mild Foam Handwash Dispenser, this guide will walk you through the installation process step by step. Follow the instructions below to ensure a successful and long-lasting installation:

• Start by selecting an appropriate mounting surface for the dispenser. Make sure the surface is clean, dry, and free of any debris. The dispenser can be mounted on most walls and countertops without any issues.
• Next, determine the height at which you want to install the dispenser. It should be placed at a convenient height for users, typically around chest or shoulder level.
• If you're mounting the dispenser on a wall, use the provided mounting hardware to secure it in place. Ensure that the dispenser is level and securely fastened to the wall.
• If you prefer to mount the dispenser on a countertop, use the optional countertop stand instead of the wall mount. Simply place the dispenser on the stand and ensure that it is stable and not at risk of tipping over.
• Once the dispenser is securely mounted, it's time to adjust the sensor settings. The Gojo Clear & Mild Foam Handwash Dispenser features a touch-free sensor, which allows for convenient and hygienic use. Follow the instructions provided with the dispenser to customize the sensor settings according to your preferences.
• If you encounter any issues during the installation process, here are some troubleshooting tips:
• Ensure that the dispenser is securely mounted and all connections are tight.
• Check the batteries and make sure they are properly installed and functional.
• Verify that the sensor is not obstructed by any objects or debris.
• If the dispenser still does not operate correctly, refer to the user manual or contact customer support for further assistance.

By following these installation instructions and troubleshooting tips, you can ensure that your Gojo Clear & Mild Foam Handwash Dispenser is properly installed and ready for use. Enjoy the convenience and hygiene benefits of this touch-free dispenser in your home or workplace.

• Ensure surface is clean, dry, and debris-free.
• Choose appropriate mounting location.
• Securely mount dispenser using provided hardware.
• Adjust sensor settings according to preference.
• Troubleshoot any installation issues that may arise.

Dispenser Settings and Features

The Gojo Clear & Mild Foam Handwash dispenser offers a range of settings and features that can be adjusted to meet your specific needs. Here is an overview of the customizable options available:

• Soap volume: The dispenser allows you to adjust the amount of foam handwash dispensed with each use. You can increase or decrease the volume to ensure optimal hand hygiene while minimizing waste.
• Sensor range: The touch-free dispenser is equipped with a sensor that detects hand movements, triggering the release of foam handwash. You can adjust the sensor range to ensure reliable activation, allowing users to conveniently access handwash without the need for physical contact.
• Multiple settings: The Gojo Clear & Mild Foam Handwash dispenser offers multiple settings for soap volume and sensor range. This allows you to customize the dispenser to suit various user preferences and location requirements.
• Refill compatibility: The dispenser is designed to be used with Gojo Clear & Mild Foam Handwash refill cartridges. You can easily install the refill cartridges into the dispenser, ensuring a continuous supply of handwash for your facility.

With these settings and features, the Gojo Clear & Mild Foam Handwash dispenser provides a convenient and adaptable solution for maintaining hand hygiene in any setting. Whether it's adjusting soap volume to minimize waste or customizing the sensor range for reliable activation, this dispenser offers versatility to meet your specific needs.

• Adjust soap volume and sensor range to meet specific needs
• Customize dispenser settings for various user preferences
• Easily install refill cartridges for continuous supply of handwash

Educating Users on EcoLogo Certification

When it comes to selecting environmentally-friendly products, one important aspect to consider is the certification they have received. The Gojo Clear & Mild Foam Handwash is proudly EcoLogo certified, which means it has undergone a thorough evaluation process to meet stringent environmental standards set by an independent organization. Understanding what EcoLogo certification means can help users make more informed choices in their hand hygiene practices.

EcoLogo certification is a voluntary program that assesses the environmental and health impacts of a product throughout its life cycle - from manufacturing to disposal. To achieve this certification, the Gojo Clear & Mild Foam Handwash has undergone rigorous testing and analysis by third-party laboratories. The certification process takes into account factors such as raw material sourcing, the use of hazardous substances, energy consumption, waste generation, and packaging materials. By meeting these criteria, the Gojo Clear & Mild Foam Handwash has proven its commitment to sustainability and reduced environmental impact.

• EcoLogo certification provides assurance that the product is environmentally friendly and has met stringent environmental standards.
• It reflects the commitment of Gojo Industries to sustainability and responsible manufacturing practices.
• The certification process involves comprehensive testing and evaluation by third-party laboratories to ensure compliance with environmental criteria.
• Factors assessed include raw material sourcing, hazardous substances, energy consumption, waste generation, and packaging materials.
• The Gojo Clear & Mild Foam Handwash has undergone this rigorous evaluation and has been certified as meeting these criteria.

Choosing a product with EcoLogo certification like the Gojo Clear & Mild Foam Handwash allows users to contribute to a more sustainable future. By supporting products that have undergone such extensive evaluation, users can feel confident in their role in reducing their environmental footprint. Embracing EcoLogo certified products not only helps protect the environment, but also promotes responsible manufacturing practices that prioritize sustainability. Together, we can make a difference in preserving our planet for future generations.

Storing and Handling Refills

Properly storing and handling refills for your Gojo Clear & Mild Foam Handwash dispenser is crucial for extending the life of both the dispenser and the soap. By following these simple guidelines, you can ensure that your refills remain effective and ready for use:

• Store in a cool, dry place: It is important to store your refills in a location that is cool and dry. Excessive heat and moisture can affect the quality and effectiveness of the soap. Find a dedicated area in your facility that meets these requirements and is easily accessible for refilling your dispenser.
• Avoid exposure to sunlight: Direct sunlight can cause the soap to deteriorate and lose its efficacy over time. To prevent this, store the refills in a place where they are shielded from direct sunlight. This will help to maintain the soap's quality and ensure its longevity.
• Adhere to expiration dates: Like any other consumable product, Gojo Clear & Mild Foam Handwash refills have expiration dates. Be sure to check the expiration date of each refill before storing and using it. Using expired soap can result in diminished performance and potentially compromise hygiene. Dispose of any expired refills properly and replace them with fresh ones.

By following these storage and handling guidelines, you can ensure that your Gojo Clear & Mild Foam Handwash refills remain effective and maintain their quality for an extended period. Remember to store them in a cool, dry place, protect them from sunlight, and always check the expiration dates for optimal performance. With proper care, your dispenser and refills will continue to provide excellent hand hygiene for your facility.